Dry-Type Transformers

Industrial Control Transformers
Industrial Control Transformers
  • 50 Through 750 vA
  • Epoxy Encapsulated Coils
  • Copper Wound
  • Optional Primary Fusing
  • Single Phase
  • 50/60 Hz
  • UL® 506 Listed
  • CSA Certified
Encapsulated 600-Volt Class Transformers
Encapsulated 600-Volt Class Transformers
  • Totally Enclosed, Non-Ventilated
  • UL® Listed for Indoor/Outdoor Use
  • 115° C Temperature Rise
  • Standard Voltages in Stock
  • Custom Designs Available
  • Three-Phase 3 Through 15 kVA
  • Buck/Boost 50 vA Through 5 kVA
  • Single-Phase 50 vA Through 25 kVA
Encapsulated 600-Volt Class Transformers
Encapsulated 600-Volt Class Transformers
Ventilated 600-Volt Class Transformers
  • UL® Listed
  • Ventilated Enclosure
  • Weather Shields Available for NEMA 3R Outdoor Applications
  • 150° C Temperature Rise
  • Optional 80° C and 115° C Rise
  • Standard Voltages in Stock Including Copper, Aluminum, Electrostatically Shielded, Low Temperature Rise and K-Factor Rated
  • Custom Designs Available
Single-Phase 15 through 167kVA
Single-Phase, 15 Through 167 kVA
Three-Phase, 15 Through 1000 kVA
Three-Phase, 15 Through 1000 kVA
K-Factor Rated, Three-Phase 15 Through 500 kVA
K-Factor Rated, Three-Phase 15 Through 500 kVA
otor Drive Isolation, Three-Phase, 7.5 Through 750 kVA
Motor Drive Isolation, Three-Phase, 7.5 Through 750 kVA
High Voltage General Purpose Transformers
  • Free-Standing Indoor Ventilated Enclosure
  • Optional NEMA 3R Outdoor Enclosure
  • Optional 80° C or 115° C Rise
  • Standard Aluminum or Optional Copper Windings
Three-Phase 2.4 and 5 kV Class 15 Through 1500 kVA
Three-Phase 2.4 and 5 kV Class
15 Through 1500 kVA
Three-Phase 8.6 and 15 kV Class 112.5 Through 1500 kVA
Three-Phase 8.6 and 15 kV Class
112.5 Through 1500 kVA
Pad-Mounted Transformers
  • Tamper-Resistant
  • Compartmentalized
  • Indoor or Outdoor Application
  • Patented Air Baffling System
  • Wide Selection of Options and Accessories
Pad-mounted Transformers
Single and Three-Phase 2.4, 5 and 15 kV Class 112.5 Through 2500 kVA
15 Through 1500 kVA
Unit Substation and High Voltage Power
  • Indoor or Outdoor Enclosures
  • Standard or Custom Designs
  • 80° C, 115° C or 150° C Temperature Rise
  • Copper or Aluminum Windings
  • UL®-Listed Designs Available
  • K-Factor Ratings
  • Applications Include: Primary and Secondary Unit Substations, Motor Drive, Rectfier, Furnace Transformer and High-Rise Power Distribution
Unit Substation and High Voltage Power
Three-Phase 2.4 Through 34.5 kV Class 112.5 Through 10000 kVA
15 Through 1500 kVA
Unit Substation and High Voltage Power
Unit Substation Transformer with Primary Switch
112.5 Through 1500 kVA
Vacuum Pressure Impregnated (VPI) and Vacuum Pressure Encapsulated (VPE)
  • Polyester Coil Encapsulation Plus Optional Epoxy Shield
  • Outstanding Environmental Protection
  • Advantages Over Cast Coil Include: Higher Thermal Overload Capabilities, Significantly Lower Cost, Less Weight, Smaller Size, Maximum Design Flexibility and Elimination of Epoxy Cracking Due to Thermally-Induced Stress
Vacuum Pressure Impregnated (VPI) and VPI/Epoxy ShieldedA
600-Volt Class Through 34.5 kV Class 112.5 Through 10000 kVA
Specialty Transformers
  • Application-Engineered Specialty Transformers
Application-Engineered Specialty Transformers
600-Volt Class Through 34.5 kV Class 50 vA Through 10000 kVA